Skip to main content

Moved on to Eleuthera

After a little over a week in The Abacos, we waited for a good weather day to make the trip from Little Harbour to Spanish Wells. Wednesday was the day. The wind was forecasted to swing to northerly, which meant an entrance through the narrow and exposed-to-the-north Ridley Head Channel would not be a great idea. We instead pointed for the further but safer Little Egg Island passage. 
We were still with Umbono, Mira’s sister boat and her owners, Pierre and Kris. 



We left at about 8:00 am with a light breeze from the west. Before long that picked up and we hoisted the main and Code 55 and motor sailed for an hour or so. Then the wind swung as forecast and built more. We put away those sails and raised the asymmetrical spinnaker with 15+ knots almost right behind us. 
The wind continued to build to 18,19, with gusts to 22 knts. The asymmetrical is good to about 20 knots, but since we were downwind running, surfing down waves and generally hauling ass, our apparent wind never went above 15 knts, even at the bottom of waves, so the sail wasn’t being stressed nearly as much as the true wind speed indicated. 
On the trip we were routinely in the 8-9s, sometimes consistently in the low 10s and on one particularly fast surf down a wave, hit 13.1knts! We saw apparent wind speeds of 6! (This is what the wind appears to be because our forward speed is negating some of the true wind speed). 
It ended up being a beautiful sailing day; we even went back to the main (reefed since we would be heading towards the wind after turning, thereby making the apparent wind be faster than the true wind speed) and jib as we entered the protected bay south of Royal Island.
We even caught a nice-sized, male Mahi Mahi on the trip on our rod and reel which we were trolling with. It put up quite a fight on the way in but gave us 8 beautiful fillets. 



Chuck was most excited about our catch!


Kris and Pierre were fighting with some sail issues so motored longer than we did and headed for the Bridge Point entrance, to the Northeast of the town of Spanish Wells. We went the longer route but because we were sailing so fast at that wind angle, we both arrived to Spanish Wells within about 2 minutes of each other (after a trip of about 60NM)!
We even had a pod of 4 dolphins swim by both our boats as we set the anchors. 


There is some great snorkeling around here so hopefully we’ll be able to check a bunch out in the coming days.

We spent Thursday walking around Spanish Wells and checked out some shops and got lunch and a drink at Budda’s Snack Shack. 



Then back to Mira to watch a nice sunset from the roof. 



Quick history lesson: Spanish Wells was so named because it was once a Spanish outpost where early sailing ships would stop before their return from the New World with gold and silver riches. They would stop to get provisions (including filling their water supply) before the long trip to Spain. 


Comments

Popular posts from this blog

Victron Isolation Transformer - How to lower the output voltage

Re-configuring a Victron Energy isolation transformer This is a companion article to a YouTube video  covering the same topic. What are they and why do I need one? Victron Energy isolation transformers are often used on boats that connect to shore power in order to provide a means of providing isolation between the shore power and the AC power that exists on the boat.  The transformer sits in between those two worlds and isolates that two power supplies through magnetic flux and an air-gap. The reason this is needed on a marine vessel is because without it, small leakage currents can flow between the earth ground for shore power and the "earth ground" connection on the boat, which is usually connected to water through a propeller shaft, out-drive, sail-drive or sacrificial zincs. That creates a loop and that small leakage current greatly accelerates any galvanic corrosion that naturally happens. Current flows through the water because of the salt content, or even in fresh-wat...

Common Questions from other Vision Owners

Update: 7 Oct 2024 Before we get to the blog article, which I wrote in March of 2023, I want to let you know that I just found out about Google's NotebookLM, which is an AI powered tool that allows you to create a Podcast style audio piece based off of whatever input you provide, in this case, the following article. Here is a link to the "podcast" it created . Honestly, I'm blown away! Original Article follows... Introduction  I received a list of questions from Steve and Lisa Heidenthal (Hull #13, Sla'inte) about how we set up our boat, where we purchased things in SA and instead of just answering them for Steve, I thought I might as well make a blog article to also help others. All of these answers will be from the following perspective: sailing the boat over from SA to where-ever having the boat built with strictly 230V/50Hz power If the boat is being shipped, I wouldn't suggest buying much in SA, as you will have an easier time finding more options (and us...

Using a NAS (Network Attached Storage) device on a boat as your own personal Cloud.

Living on a self-sufficient boat without giving up The Cloud?! If you are at all like me, you've begun to rely more and more on one or more Cloud Services.  Apple iCloud, Dropbox, Google Drive, Microsoft OneDrive and many, many more basically all offer the same solution: "You have digital things that are important to you; you pay us a small amount per month and we'll manage keeping it safe and protect you from hardware failures and data loss." I firmly believe that hosted cloud storage is one of the great conveniences that just about anyone under the age of 70 should be using.  The solutions are downright cheap, given how much storage capacity you can get and how much you would pay to get that data back if you lost it. I have used all of the above and my provider of choice is Google Drive, though we also use Apple iCloud to automatically backup our iDevices, as least for now. Life 2.0 We will still have a cloud storage provider when we set sail, but what are we going ...