Skip to main content

Picking up a truck and visiting friends - The start of it all...

Image
By
Before the fall of 2018, Sue and I had never really sailed, unless you count one Sunfish Rental at Lake Crabtree Park in Morrisville, NC and a daysail that Sue did in Buffalo, NY when she was co-oping at General Motors. We've owned a 17' Jetboat used in local lakes since June of 1998, but that's usually 4 or 5 hours max at a time on relative calm waters. 

 So what happened to get us on the Sailing kick?  Buying a Krispy Kreme box truck and visiting friends in Annapolis, of course!  

 Our business was expanding and needed an additional installation vehicle.  I found an ex-Krispy Kreme delivery box truck that fit the bill, being sold by Penske in Baltimore, MD. (It smelled amazing, by the way).  In order to get it back to Raleigh, I'd have to fly up to Baltimore on a Friday, pick up the truck and then drive back to Raleigh with Sue staying in Raleigh to keep things running.  

 Our super-close friends, and best-man (Jesse) and Matron of Honor (Lisa) live in Annapolis and invited me to spend the night at their place before having to drive back.  "Oh, and by the way, one of the largest sailboat shows in the country (probably world) is going on, so let's go there after you get the truck?"  Sounded fun to me. 

 We arrived in downtown Annapolis and had a lunch and a few drinks.  It was becoming obvious that Annapolis is a drinking town with a sailing problem.  After lunch we walked to the show and it's a big show, focused just on sail boats.  Remember, at this point, I pretty much knew nothing about sailing.  I peppered Jesse with questions, since he is an avid sailor that grew up sailing on the Finger Lakes of NY, crews on racing boats often and Bareboat charters in the BVIs every year.  Me: "What's this rope for?" Jesse: "First, that's called a line or sheet."  Me: "Why does this sheet go to there?"  Jesse: "That's actually a halyard"

 After walking around for a while, we starting visiting big, beautiful catamarans and as it turned out, Lisa and Jesse's retirement plan is to sell everything and live on a 40-something foot catamaran in the Caribbean.  We probably toured at least 8 catamarans, each have 3 or 4 cabins, 3 or 4 heads and having amazingly open and inviting interiors.

 By the end of the show I was hooked!  I wanted to copy their retirement plan!  The idea of having none of the responsibilities that come along with unnecessary possessions and being able to see new places all the time consumed my thoughts for the drive back to Raleigh and I couldn't even wait until getting back to tell Sue all about my experience and my epiphany.  We talked about it on my drive back and more over the next couple of days, and she actually seemed interested in learning more?!

 The next step was to start learning and giving ourselves reality checks...

 -Mike
Labels:

Comments

Post a Comment

Popular posts from this blog

Victron Isolation Transformer - How to lower the output voltage

By
Re-configuring a Victron Energy isolation transformer This is a companion article to a YouTube video  covering the same topic. What are they and why do I need one? Victron Energy isolation transformers are often used on boats that connect to shore power in order to provide a means of providing isolation between the shore power and the AC power that exists on the boat.  The transformer sits in between those two worlds and isolates that two power supplies through magnetic flux and an air-gap. The reason this is needed on a marine vessel is because without it, small leakage currents can flow between the earth ground for shore power and the "earth ground" connection on the boat, which is usually connected to water through a propeller shaft, out-drive, sail-drive or sacrificial zincs. That creates a loop and that small leakage current greatly accelerates any galvanic corrosion that naturally happens. Current flows through the water because of the salt content, or even in fresh-wat...
Post a Comment
Read more

Raising the dinghy, easier!

By
The Davit System The Vision 444 comes with a Carbon Fiber Davit system that is used to hoist a dinghy.  As time has gone on, some of the exact specifics of the davit system have evolved and changed slightly, but for our boat (Hull #11) and the ones near to it, this is how it operates.  Two Main Steps First, after attaching the dinghy to a forward and aft attachment line, the davit arms are raised; pivoting on axles which mount the davit to the transom of the boat.  This step is accomplished by attaching a line which runs through several blocks to the starboard, aft power winch.  Pressing "2" (low speed) on the winch power buttons and raising the davit into its full upright position, where it can be lashed to the boat with Dyneema loops. Second, is to raise the dinghy to be close under the horizontal beams of the davit arms.  The dinghy attachment lines, that are attached to the dinghy's bridle, run up through a fixed block at the end of the davit arms and then t...
Post a Comment
Read more

Vision 444 - How to (hopefully never have to) use a Storm Sail

By
 How to use the Storm Sail on a Vision 444 My fellow Visionary Pierre on Umbono reached out recently wanting to review the steps for deploying the Storm Sail, since he was forecasted to be in less-than ideal sailing conditions in the next day. What better opportunity to write a blog article! This is going out quickly to support Pierre, but I will come back and add pictures and maybe link a video later. Preparation Keep the Storm Sail and everything you need for it somewhere where it is easy to get. We keep ours in the large lazarette under the Cockpit table seating. If you think you might need the Storm Sail, you probably should have the jacklines put out too.  The system we use to deploy the Storm Sail reduces the time we need to be forward, but wearing a life vest with harness and being clipped into the lazy jacks is the way to go here. Our Storm sail is in it's own bag with the following: A port sheet attached to the clew with a bowline A starboard sheet attached to the cle...
Post a Comment
Read more